The following page provides links to research publication
sites from some Australasian research centres. Where links are not
available, full publication lists are published below. Please
contact the Alliance (jtgourley@bigpond.com) with
any lists that are not yet included.
Industrial R&D publication sites or
publications are also included following the Research
lists.
1. ANSTO Geopolymer Group:
See the full list below.
Contact: Dan Perera at dsp@ansto.gov
2. CSIRO:
List under construction
Contact: Kwesi Sagoe-Crentsil at Kwesi.Sagoe-Crentsil@csiro.au
3. CSRP Geopolymer Program:
See http://www.csrp.com.au/projects/geopolymers.html
Contact: Arie Van Riessen at A.VanRiessen@curtin.edu.au
4. Curtin University Engineering
Department:
Hardjito, Djwantoro and Rangan, Vijaya (2005)
Development and Properties of Low-Calcium Fly Ash-Based Geopolymer
Concrete. Technical Report no. Report GC1, Curtin University of
Technology, Faculty of Engineering.
Wallah, S.E. and Rangan, B.V. (2006) LOW-CALCIUM FLY
ASH-BASED GEOPOLYMER CONCRETE: LONG-TERM PROPERTIES. Technical
Report no. GC2, Curtin University of Technology, Faculty of
Engineering.
Sumajouw, M.D.J. and Rangan, B.V. (2006) LOW-CALCIUM FLY
ASH-BASED GEOPOLYMER CONCRETE: REINFORCED BEAMS AND COLUMNS.
Technical Report no. GC3, Curtin University of Technology, Faculty
of Engineering.
Rangan, B.V. (2008) FLY ASH-BASED
GEOPOLYMER CONCRETE. Technical Report no. GC4, Curtin University of
Technology, Faculty of Engineering.
Contact: Vijay Rangan at V.Rangan@curtin.edu.au
Full papers are available from
http://espace.lis.curtin.edu.au/
by typing "geopolymers" into Quick Search and following the
prompts, or by clicking on the direct links above for each
paper.
5. Industrial Research Ltd,
NZ:
List under construction
6. Monash University:
See full list below.
Contact: Jay Sanjayan at
jay.sanjayan@eng.monash.edu.au
7. The University of Melbourne
Geopolymer Group
(part of Chemical and
Biomolecular Engineering Department):
see
http://www.chemeng.unimelb.edu.au/geopolymer/publications.html
and
http://www.zeobond.com/pap.htm
Contact: Dr
John Provis at jprovis@unimelb.edu.au
8. The University of Western
Australia:
List under construction.
LISTS:
ANSTO
Current to Feb
2008
E R Vance, D S Perera, Z Aly, K S Finnie, J V
Hanna, C L Nicholson, R L Trautman M W A Stewart and C
Dickson, “Geopolymers for radioactive waste
immobilisation,” abstract: TP24, 27th Annual
Condensed Matter and Materials Meeting, 4-7 February, 2003, Wagga
Wagga, NSW.
D S Perera, M G Blackford, C L Dickson, E R
Vance and R L Trautman, “Geopolymers for radioactive waste
immobilisation made from New Zealand fly ash,” abstract,
Fifth Conference on Nuclear Science & Engineering, 5-6 Nov.
2003, Canberra.
D S Perera, E R Vance, Z Aly, K S Finnie, J V
Hanna, C L Nicholson, R L Trautman and M W A Stewart,
“Characterisation of geopolymers for the immobilisation of
intermediate level waste,” 9th International
Conference on Radioactive Waste Management and Environmental
Remediation, September21-25, 2003, Oxford, England,
Proceedings ICEM03 – CD-4589, ASME, Fairfield, USA.
D. S Perera, C. L Nicholson, M. G. Blackford, R. A.
Fletcher, and R. L, Trautman, “Geopolymer Made
Using New Zealand Fly Ash,” abstract, PACRIM 5, International
Ceramics Conference, 29 Sept - 2 Oct, 2003, Nagoya, Japan.
(Invited)
D S Perera and E R Vance, “Geopolymers: An
ecologically-friendly material,” abstract, 5th
International Symposium on Eco-materials Processing & Design,
Japan, 19-21 January, 2004, Nagaoka, Japan.
(Invited)
D. S Perera, C. L Nicholson, M. G. Blackford, R. A.
Fletcher, and R. L, Trautman, “Geopolymer Made
Using New Zealand Fly Ash,” J. Jap. Ceram. Soc.
112 (4), 2004, S108-S111.
D. S Perera, M. G. Blackford,
E. R. Vance, J. V. Hanna, K. S Finnie, and C. L.
Nicholson, “Geopolymers for the immobilization of radioactive
waste,” Scientific Basis for Nuclear Waste Management XXVIII,
Materials Research Society, Symposium Proceedings, Vol.824 (Ed. J M
Hanchar, S Stroes-Gascoyne and L Browning), 2004, 607-612.
D. S. Perera, E. R.
Vance, D. J. Cassidy, M. G. Blackford, J. V. Hanna, R. L. Trautman,
and C. L. Nicholson,, "The effect of Heat on Geopolymers made using
Fly Ash and Metakaolinite", Advances in Ceramic Matrix Composites X
(Ed. J P Singh, N P Bansal and W M Kriven), Ceramic Transactions,
165, 2004, 87-94, pub. American Ceramic
Society, Westerville, Ohio, USA.
(Invited)
D S Perera, C L
Nicholson, Z Aly, D J Cassidy, E R Vance, K S Finnie and R A
Fletcher, “The effect of ageing on geopolymers made from
fly ash and metakaolinite”, extended abstract, Austceram
2004, 29 Nov- 1 Dec, Melbourne.
E R Vance,
D S Perera and Z Aly, “Geopolymers for radioactive waste
immobilisation,” extended abstract, Austceram 2004, 29 Nov- 1
Dec, Melbourne.
D S Perera, Z Aly, M
Mizumo and E R Vance, “Geopolymers for thermal insulation and
for immobilising heavy metals,” abstract, 6th International
Symposium on “Hybridized Materials with Super
Functions,” 10-11 Dec, 2004, Gunajuato, Mexico.
(Invited)
M G Blackford, D S Perera, E R Vance and
Z Aly, “Characterisation of geopolymers containing cesium and
strontium,” abstract, AMAS VIII, 15-17 February, 2005,
Melbourne, Australia.
D S Perera, E R Vance, K S
Finnie, M G Blackford, J V Hanna, D J Cassidy and C L Nicholson,
“Disposition of water in metakaolinite-based
geopolymers,” Advances in Ceramic Matrix Composites XI (Ed. N
P Bansal, J P Singh and W M Kriven), Ceramic Transactions,
175 (2006) 225-236, pub. American Ceramic
Society, Westerville, Ohio, USA.
(Invited)
E R Vance, D S Perera and Z Aly, “Feasibility
of geopolymers to incorporate tank waste,” Environmental
Issues and Waste Management technologies in the Ceramic and Nuclear
Industries XI (ed. C C Herman, S Marra, D Spearing, L. Vance and J
Vienna), Ceramic Transactions 176 (2006)
75-80.
D S Perera, E R Vance, Z Aly, J
Davis and C L Nicholson, “Immobilization of
Cs and Sr in geopolymers with Si/Al ~ 2,” Environmental
Issues and Waste Management technologies in the Ceramic and Nuclear
Industries XI (ed. C C Herman, S Marra, D Spearing, L. Vance and J
Vienna), Ceramic Transactions 176 (2006)
91-96.
D S Perera, E R Vance, Y
Zhang, Z Zhang, J Davis and P. Yee, “Speciation studies of
Fe, Mn, Ca and Ti and dissolution studies in a metakaolinite-based
geopolymer with Si/Al ~ 2,” Proceedings World Congress
Geopolymer 2005, Saint-Quentin, France (Ed. J. Davidovits), pp.
57-9.
D S Perera, M G Blackford, E R
Vance and Z Aly, “Amorphous inorganic polymers for
immobilisation of waste and heavy metals," abstract COST
Action D32 - Chemistry in High-Energy Microenvironment, meeting of
experts, 15-16 September 2005, Modena, Italy.
D S Perera, E R Vance and Z Aly,
“Immobilization of simulated Hanford waste in geopolymers
,” abstract PACRIM 6 International Ceramics Conference,
September 11-16, 2005, Maui, Hawaii.
E R Vance, D S Perera, Z Aly, “Aqueous
durability of geopolymers containing radionuclides,”
abstract PACRIM 6 International Ceramics Conference, September
11-16, 2005, Maui, Hawaii.
P A Walls, D S Perera and E R Vance, “A
study of the setting and curing processes in metakaolinite based
geopolymers using non-destructive impedance
spectroscopy,” abstract PACRIM 6 International Ceramics
Conference, September 11-16, 2005, Maui, Hawaii.
E. R. Vance, D. S. Perera, Z.
Aly, M. Blackford, Y. Zhang, Z. Zhang, M. Rowles, J. V. Hanna, K.
J. Pike, J. Davis and O. Uchida, “Solid State Chemistry
phenomena in Geopolymers with Si/Al ~ 2,” Proceedings
of the GGC 2005 (International Workshop on Geopolymers and
Geopolymer Concrete), September, 28-29, 2005, Perth, Australia. CD
ROM, nGGC2005.pdf
(Invited)
D S Perera, Z. Aly , E R Vance and M. Mizumo,
“Immobilisation of Pb in a geopolymer matrix,” J. Am
Ceram Soc. 88 (2005) 2586-8.
D S Perera and R L Trautman, “Geopolymers
with the potential for use as refractory castables,” Adv. in
Tech. Mat. and Mat. Proc. J., 7 [4] (2005)
187-190.
D S Perera, “Geopolymers: From pyramids to
the sewer,” Newsbulletin of the Australasian ceramic Society,
20 (2005) 8-10.
B A Latella, D S Perera, T
R Escott and D J Cassidy, “Adhesion of glass to steel using a
geopolymer,” J Mat. Sci. 41 (2005)
1261-4.
E. R. Vance, D. S. Perera, Z. Aly, M. Blackford, Y.
Zhang, M. Rowles, J. V. Hanna, K. J. Pike, J. Davis, P. Yee and O.
Uchida, “Immobilisation of radioactive waste in
geopolymers,” GLOBAL 2005 (International Conference on
Nuclear Energy Systems for Future Generation and Global
Sustainability), Tsukuba, Japan, Oct 9-13, 2005, Proceedings
CD-ROM–GL230,
D S Perera and E R
Vance, “Geopolymers: A challenge in solid state
chemistry,” abstract, the 8th International Symposium on
“Hybridized Materials with Super Functions,” Oct 19-20,
2005, Morelia, Mexico. (Invited Plenary)
D S Perera,
“Geopolymers: Low energy and environmentally sound
materials,” Proceedings of the First International Congress
on Ceramics, Toronto, Canada, June 25- 30, 2006. (CD-ROM)
(Invited)
R D Hart, J L Lowe, D C
Southam, D S Perera, P Walls, E R Vance, T Gourley and K
Wright, “Aluminosilicate inorganic polymers from waste
materials,” Proceedings of the Third International
Conference on Sustainable Processing of Minerals and Metals, 5-6
June 2006, Newcastle, Australia.
L Ly, E R Vance, D S Perera, Z Aly and K Olufson,
“Leaching of geopolymers in deionised water,” Adv in
Tech Mater and Mater Proces J, 8 (2006)
236-247.
D S Perera, E R Vance, S.
Kiyama, Z Aly and P Yee, “Development of geopolymers as
candidate materials for low/intermediate level highly alkaline
nuclear waste,” abstract 15th Pacific Basin
Nuclear Conference, 15-20 October, 2006, Sydney, Australia.
P. A. Walls, “Optimising the Processing of
Geopolymer Cements,” abstract 26th Conference on
Cement and Concrete Science,11-12 September 2006, Sheffield
University UK.
E. R. Vance, M. G. Blackford, J. V. Hanna, Z. Aly
and D. S. Perera, “Geopolymers for low-level waste
immobilization,” abstract 108th Annual Meeting of the
American Ceramic Society Combined with MS&T’06, October
15-19 2006, Cincinnati, USA.
D. S. Perera, E. R.Vance, S. Kiyama, Z. Aly and P.
Yee, “Geopolymers as Candidates for Low/Intermediate Level
Highly Alkaline Nuclear Waste,” Abstract 2006 MRS Fall
Meeting, November 27- December 1, Boston, USA
D S Perera, O Uchida, E R
Vance and K S Finnie, “Influence of the curing schedule
on the integrity of geopolymers,” J. Mater. Sci.
42 (2007) 3099-3106.
D S Perera, A M Fuchs, E R Vance and S V Smith,
“Nuclear wasteform materials,” presented at the First
Centre for Antimatter-Matter Studies Workshop, 30 Nov-2 Dec 2006,
Sunshine Coast, Australia.
D S Perera,
“Geopolymers: Past, present and the future,” presented
at the 14th International Symposium on Hybridized
Materials and Super Functions, Monterrey, Mexico, 3-6 Dec 2006.
(Invited plenary)
D S Perera and E R Vance, “Aqueous
leachability of geopolymers,” abstract
31st Cocoa Beach International Conference and Exposition
on Advanced Ceramics and Composites, Jan 21-26 2007, Cocoa
Beach, USA. (Invited)
E. R. Vance, P. A. Walls, J. V. Hanna, K. J. Pike,
J. D. Cashion, Z. Zhang and D.S. Perera, “Setting Kinetics
and Ionic Speciation in Geopolymers,” abstract
31st Cocoa Beach International Conference and Exposition
on Advanced Ceramics and Composites, Jan 21-26 2007, Cocoa Beach,
USA. (Invited)
D S Perera, E R Vance, Z Aly, A Fuchs, S Kiyama, J
Davis and S V Smith, “Feasibility of incorporating cations
and anions expected in radioactive waste streams in
metakaolin-based geopolymers,” Abstract, Alternative
Materials for Radioactive Waste Stabilization and Nuclear Materials
Containment,” conference March 25-29, 2007, Barga, Italy.
(Invited).
J Davis and D S Perera, “Geopolymer Porosity
Measurements by Systematic Manual Point Counting using SEM,”
Abstract, Materials and Austceram 2007 International Conference,
4-6 July 2007, Sydney, Australia.
E. R.Vance, D. S. Perera and Z. Aly, “Aqueous
Dissolution and Immobilisation Potential of Geopolymers for
Radioactive Ions,” Abstract, Materials and Austceram 2007
International Conference, 4-6 July 2007, Sydney, Australia.
Z Aly, J Davis, E R Vance, D S Perera and D Durce,
“Aqueous leachability of metakaolin-based geopolymers with
molar ratios of Si/Al = 1.5 to 4,” Abstract Materials and Austceram 2007 International
Conference, 4-6 July 2007, Sydney, Australia.
B A Latella, D S Perera, D Durce, E G Mehrtens and
Y Sasaki, “Mechanical Properties of Metakaolin-based
Geopolymers,” Abstract, Materials and Austceram 2007
International Conference, 4-6 July 2007, Sydney, Australia.
P. A. Walls, “Thermal treatment of
geopolymers and cement,” Abstract,
Materials and Austceram 2007 International Conference, 4-6 July
2007, Sydney, Australia.
P. A. Walls, ”AC Impedance Spectroscopy Study
of Geopolymers Doped with Ca and Mg Cations and Cl, NO3
and SO4 Anions,” abstract 31sth Annual
Condensed Matter Physics Meeting, February, 2007, Wagga Wagga,
NSW.
D S Perera, J D Cashion, M G Blackford, Z Zhang,
and E R Vance, “Fe speciation in geopolymers with Si/Al
~2,” J Euro Ceram Soc, 27 (2007)
2697-2703.
M G Blackford, J V Hanna, K J Pike, E R Vance and D
S Perera, “Transmission electron microscopy and nuclear
magnetic resonance in geopolymers for radioactive waste
immobilisation,” J. Am. Ceram. Soc., 90
(2007) 1193-1199.
D R M Brew, “Non-thermal Activation of
Geopolymer Precursors,” Abstract. Materials
and Austceram 2007 International Conference, 4-6 July 2007, Sydney,
Australia.
A.M.
Fuchs, D. Perera, S.V. Smith, S. Huang, “Designing
geopolymers for the encapsulation of 85Sr(II) and
134Cs(I), Abstract, Materials and Austceram 2007
International Conference, 4-6 July 2007, Sydney, Australia.
E. R. Vance, D. S. Perera, Z. Aly, P. A.
Walls, Y. Zhang, D. J. Cassidy and C. S. Griffith,”
Immobilisation of Cations and Anions in Geopolymers“,
abstract in Materials Science and Technology 2007 Conference and
Exhibition, Detroit, MI, USA, Sept 16-20, 2007.” abstract in
the Materials Science and Technology 2007 Conference and
Exhibition, September 16-20, 2007, Detroit, Michigan, USA.
D. S. Perera, E. R. Vance, S. Kiyama, Z. Aly
and P. Yee (2007), “Geopolymers as Candidates for
Low/Intermediate Level Highly Alkaline Waste”, in
Scientific Basis for Nuclear Waste Management XXX, Eds. D. S. Dunn,
C. Poinssot and B. D. Begg, Materials Research Society,
Warrendale, PA, USA, pp. 361-6.
D S Perera, S Kiyama, J Davis, P Yee and E R Vance,
“Aqueous leachability of geopolymers containing hazardous
species,” Ceram. Eng. Sci. Proc., pub Am. Ceram. Soc,
Westerville, Ohio, USA (in –press)
D. Perera, L. Vance and S Kiyama, “Emerging
cementitious materials for repository radioactive waste
immobilization/storage,” abstract, 7th Biennial
Conference of the Australian Nuclear Association, 19 October 2007,
Sydney, Australia.
E. R. Vance, J. H. Hadley, Jr., F. H. Hsu and E.
Drabarek, “Positron Annihilation Lifetime Spectra in a
Metakaolin-based Geopolymer, J. Amer. Ceram. Soc., 2007 (DOI:
10.1111/j.1551-2916.2007.02173.x)
D R M Brew and E R Vance, “Arsenic
remediation using geopolymers,” Proc. First CSRP Annual
Conference, 21-22 November 2007, Melbourne, Australia,
pp.47-48.
P A Walls, E R Vance and D S Perera,
“Development of geopolymer materials at ANSTO,” Proc.
First CSRP Annual Conference, 21-22 November 2007, Melbourne,
Australia, pp.61-62.
D. S. Perera, E R Vance and M. Breza,
“Candidacy of geopolymers to immobilise/contain radioactive
and hazardous waste,” abstract submitted to the International
Congress on Ceramics – 2, June 29- July 4 2008, Verona,
Italy. (Invited)
D. S. Perera, Z. Aly, J. Davis, I. Kurlapski and E.
R. Vance, “Aqueous leachability of geopolymers containing the
cations Ag, Cd and Co,” abstract submitted to the
International Congress on Ceramics – 2, June 29- July 4 2008,
Verona, Italy.
Z. Aly, E.R. Vance and D. S. Perera,
“Comparison of measured aqueous leachabilities of Cs- and Sr-
containing metakaolin-based geopolymers using regulatory leaching
test protocols,” abstract submitted to the International
Congress on Ceramics – 2, June 29- July 4 2008, Verona,
Italy.
D. S. Perera, B. Latella, J. Davis, Y. Sasaki and
E. Mehrtens, “Comparison of phosphate-bonded and
alkali-bonded metakaolin- and fly ash-based materials,”
abstract submitted to the International Congress on Ceramics
– 2, June 29- July 4 2008, Verona, Italy.
E. R. Vance, D. S. Perera and R. Branson,
“Inexpensive porous geopolymer materials using waste perlite
residues,” abstract submitted to the International Congress
on Ceramics – 2, June 29- July 4 2008, Verona, Italy.
E. Kamseu, C. Leonelli, D. S. Perera,
“Investigation of volcanic ash-based geopolymers as
potential building materials,” abstract submitted to the
International Congress on Ceramics – 2, June 29- July 4 2008,
Verona, Italy.
B. A. Latella, D. S. Perera, D. Durce, E. G.
Mehrtens and J. Davis, “Mechanical properties of
metakaolin-based geopolymers with molar ratios of Si/Al ~2 and
Na?Al ~ 1”, J. Mater. Sci (in-press).
Z. Aly, E. R. Vance, D. S. Perera, J. V. Hanna, C.
S. Griffith, J. Davis and D. Durce, “Aqueous leachability of
metakaolin-based geopolymers with molar ratios of Si/Al = 1.5 to
4,” submitted to J. Nucl. Mater.
E. Kamesu, C. Leonelli, D. S. Perera, “A
study on sintering of geopolymers by optical dialtometry,”
abstract submitted to the International Conference on Sintering
– Sintering 2008, Novemebr 16-20, 2008, La Jolla, California,
USA.
Contact: Dan Perera at dsp@ansto.gov
MONASH UNIVERSITY
Papers published by Monash University
Researchers
Contact Person:
Jay Sanjayan, Associate
Professor in Civil Engineering
Contact email:
jay.sanjayan@eng.monash.edu.au
Papers published in
Technical Journals
1.
Kong, D., Sanjayan, J.G., Sagoe-Crentsil, K., “Factors
affecting the performance of metakaolin geopolymers exposed to
elevated temperatures”, Journal of Material Science, vol. 43,
No. 3, February 2008, pp. 824–831.
2.
Kong, D., Sanjayan, J.G., Sagoe-Crentsil, K., “Comparative
Performance of Geopolymers made with Metakaolin and Fly Ash after
exposure to Elevated Temperatures”, Cement and Concrete
Research, Volume 37, Issue 12, pp. 1583–1589, December
2007.
3.
Bakharev, T., “Thermal behaviour of geopolymers prepared
using class F fly ash and elevated temperature curing”,
Cement and Concrete Research, v 36, n 6, June, 2006, p
1134-1147.
4.
Bakharev, T., “Heat resistance of geopolymer materials
prepared using class F fly ash”, Journal of the Australasian
Ceramic Society, v 42, n 1, 2006, p 36-44.
5.
Bakharev, T., “Durability of geopolymer materials in sodium
and magnesium sulfate solutions”, Cement and Concrete
Research, v 35, n 6, June, 2005, p 1233-1246.
6.
Bakharev, T., “Geopolymeric materials prepared using Class F
fly ash and elevated temperature curing”, Cement and Concrete
Research, v 35, n 6, June, 2005, p 1224-1232.
7.
Bakharev, T., “Resistance of geopolymer materials to acid
attack”, Cement and Concrete Research, v 35, n 4, April,
2005, p 658-670.
8.
Bakharev, T., Sanjayan, J.G., Cheng, Y.-B., “Resistance of
alkali activated slag concrete to acid attack”, Cement and
Concrete Research, Vol. 33, No.10, October, 2003, pp.
1607-1611.
9.
Bakharev, T., Sanjayan, J.G, and Y.-B.Cheng, “Sulphate Attack
on Alkali Activated Slag Concrete”, Cement and Concrete
Research, Vol. 32 (2), pp. 211-216, 2002.
10.
Collins, F., and Sanjayan, J., “Development of Novel Alkali
Activated Slag Binders to Achieve High Early Strength Concrete for
Construction Use”, Australian Civil Engineering Transactions,
Vol. CE44, Institution of Engineers Australia, 2002, pp. 91 –
102.
11.
Bakharev, T., Sanjayan, J.G., and Y.-B.Cheng, “Resistance of
Alkali Activated Slag Concrete to Carbonation”, Cement and
Concrete Research, 31, 2001, pp. 1277-1283.
12.
Collins, F., and Sanjayan, J.G., “The need for a standard
restrained shrinkage test”, Concrete in Australia, Journal of
the Concrete Institute of Australia, Vol. 27, No. 3,
September-November, 2001, pp. 24-27.
13.
Bakharev, T., Sanjayan, J.G, and Y.-B.Cheng, “Microstructure
and Properties of Alkali-Activated Slag Concrete”, Journal of
the Australasian Ceramic Society, 37(1), pp. 115-120, 2001.
14.
Collins, F.G., Sanjayan, J.G., “Early Age Strength and
Workability of Slag Pastes Activated by Sodium Silicates”,
Magazine of Concrete Research, Vol.53, No. 5, October 2001, pp.
321-326.
15.
Collins, F.G., Sanjayan, J.G., “Microcracking and Strength
Development of Alkali Activated Slag Concrete”, Cement and
Concrete Composites, Vol. 23/4-5, September 2001, pp. 345-352.
16.
Bakharev, T., Sanjayan, J.G., and Y.-B.Cheng, “Resistance of
Alkali Activated Slag Concrete to Alkali Aggregate Reaction”,
Cement and Concrete Research, Vol. 31, Issue. 2, 2001,
p.331-334.
17.
Collins, F., and Sanjayan, J.G., “Effect of Pore Size
Distribution on Drying Shrinkage Of Alkali Activated Slag
Concrete”, Cement and Concrete Research, Vol. 30, Issue. 9,
2000, pp. 1401 – 1406.
18.
Bakharev, T., Sanjayan, J.G. and Cheng, Y.B., “Effect of
Admixtures on Properties of Activated Slag Concrete”, Cement
and Concrete Research, Vol. 30, Issue. 9, 2000, pp. 1367 –
1374.
19.
Collins, F., and Sanjayan, J.G., “Numerical Modeling of
Alkali Activated Slag Concrete Beams subjected to Restrained
Shrinkage”, ACI Materials Journal, American Concrete
Institute, Vol. 97, No. 5, September-October, 2000, pp.
594-602.
20.
Collins, F., and Sanjayan, J.G., “Cracking Tendency of
Alkali-Activated Slag Concrete Subjected to Restrained
Shrinkage”, Cement and Concrete Research, Vol. 30, No. 5,
2000, pp. 791-798.
21.
Bakharev, T., Sanjayan, J.G., and Cheng, Y.B., “Effect of
Elevated Temperature Curing on Properties of Alkali Activated Slag
Concrete”, Cement and Concrete Research, Vol. 29 (10), 1999,
pp. 1619-1625.
22.
Collins, F., and Sanjayan, J.G., “Development of Concrete
utilising Alkali-Activated Slag”, Concrete in Australia,
September-November, 1999, Vol. 25, No. 3, pp. 23-27.
23.
Collins, F., and Sanjayan, J. G., “Strength and shrinkage
properties of alkali activated slag concrete placed into a large
column”, Cement and Concrete Research, 29(5), 1999,
pp.659-666.
24.
Collins and Sanjayan, J.G., “Strength and shrinkage
properties of alkali activated slag concrete containing porous
coarse aggregate”, Cement and Concrete Research, 1999, 29(4),
pp. 607 – 610.
25.
Collins, F., and Sanjayan, J.G., “Workability and Mechanical
Properties of Alkali Activated Slag Concrete”, Cement and
Concrete Research, May, 1999, Vol. 29, Issue.3, p. 455-458.
26.
Collins, F., and Sanjayan, J.G., “Effects of Ultra Fine
Materials on Workability and Strength of Concrete containing Alkali
Activated Slag as the Binder”, Cement and Concrete Research,
May, 1999, Vol.29, Issue.3, pp. 459-462.
27.
Bakharev, T., Sanjayan, J. G. and Cheng, Y. B., “Alkali
Activation of Australian Slag Cements”, Cement and Concrete
Research, January 1999, Vol. 29, Issue 1, p. 113-120.
28.
Bakharev, T., Sanjayan, J. G. and Cheng, Y. B., “Hydration of
Slag Activated by Alkalis”, Journal of the Australasian
Ceramic Society, Vol. 34, No. 2, 1998, pp. 195-200.
29.
Collins, F., and Sanjayan, J.G., “Early Age Strength and
Workability of Slag Pastes activated by NaOH and
Na2
CO3”, Cement and Concrete Research, May
1998, Vol.28, No.5, pp. 655-664.
Papers published in Conference
Proceedings
1.
Kong, D.,
Sanjayan, J.G., and Sagoe-Crentsil, K., “Differences in
Elevated Temperature Performances of Geopolymers made With
Metakaolinite and Fly-Ash”, Advances in Cement and Concrete X
- Sustainability (ed: Scrivener, Montiero and Hanehara),
Engineering Conferences International, Davos, Switzerland, July
2-7, 2006, pp. 26 - 30.
2.
Kong, D.,
Sanjayan, J.G., and Sagoe-Crentsil, K., “The Behaviour of
Geopolymer Paste and Concrete at Elevated Temperatures”,
Proceedings of the International Conference on Pozzolan, Concrete
and Geopolymer, 24-25 May 2006, Khon Kaen, Thailand, pp. 105
– 119.
3.
Kong, D., Sanjayan, J.G., and
Sagoe-Crentsil, K., “Damage due to Elevated Temperatures in
Metakaolinite-Based Geopolymer Pastes”, International
Workshop on Geopolymers and Geopolymer Concrete, Curtin University
of Technology, Perth, September, 2005, published on CD, 11
pages.
4.
Bakharev,T., and Sanjayan,
J.G., "Alkali-Activated Slag Concrete: Durability in the Aggressive
Environment, Proceedings of International Conference 'Geopolymer
2002 - turning potential into profit', Melbourne, 28-29, October,
2002 (11 pages).
5.
Collins, F., Sanjayan, J.G.,
"Development of Advanced Slag Binder Concrete to Achieve High Early
Strength for Construction", Proceedings of the Concrete 2001
Biennial Conference, Concrete Institute of Australia, September
2001, Perth, pp. 73-78.
6.
Bakharev, T. and Sanjayan, J.
G., “Study of Alkali Activated Slag Concrete”,
Proceedings of the Australasian Structural Engineering
Conference, Auckland, September, 1998, pp. 663-669.
INDUSTRIAL PUBLICATION SITES
or paper references.
1. Parsons
Brinckerhoff.
Contact: mdrechsler@pb.com.au
Web: www.pbworld.com
LIST:
1. Drechsler M., "Geopolymers using
waste material to bring resource sustainability to construction and
mining industries.", Proc. of Common Ground 07, 10th Aust-NZ
Conference on Geomechanics, Brisbane, 2007.
2. Drechsler M. and Graham A.,
"Geopolymers - An innovative materials technology bringing resource
sustainability to construction and mining industries.", Proc.
48th Institute of Quarrying Conference, Adelaide, Oct 2005.
3. Nowak R, "Build 'em high, and
make them green.", New Scientist, 26 Jan 2009, page
28.
